- According to model, pour a little oil on the
2
plates (A, B, D, E and F) and wipe off with a
soft cloth.
Remove mini-pans.
According to model :
- Place the Pierrade
®
on the element, polished (bevelled) side up.
Never place the Pierrade
on a hot element.
Only use the Pierrade
comes with the appliance or that has been
purchased from an authorised dealer and
only on the support for which it was
designed.
- Place the plate (A, B, D, E or F) on the
element.
Never place aluminium foil or any other
object under the Pierrade
or between the element and reflector.
Place the appliance in the centre of the table,
out of children's reach.
Place the appliance on a firm surface, avoid
using on soft surfaces i.e. table felt.
Never place the appliance directly on a
fragile surface (glass table, tablecloth,
varnished furniture...).
This product has been designed for domes-
tic use only. Any commercial use, inappro-
priate use or failure to comply with the ins-
tructions, the manufacturer accepts no res-
ponsibility and the guarantee will not apply.
Plugging and preheating
Completely unwind the cord.
Check the electricity supply is compatible
with the power and voltage indicated
underneath the appliance.
Only plug in the appliance on an earthed
socket.
Model with fixed cord: if the power supply
cord is damaged, it must be replaced by the
manufacturer or its service agent or a
similarly qualified person in order to avoid a
hazard.
Any error in connecting the appliance
invalidates the guarantee.
Plug the cord into the appliance (according to
model) and then into the mains socket.
Check that the cable does not get in the way of
guests sitting at the table.
All manuals and user guides at all-guides.com
cooking stone (C or G)
®
cooking stone
®
cooking stone that
®
cooking stone
Never leave the appliance plugged in when
not in use.
When in use, never leave the appliance
unattended.
- Model with switch:
Press switch (P): the light comes on
- Model with thermostat:
Place the thermostat (P) on position 6.
Leave the appliance to preheat:
- 5 to 8 minutes for the raclette function.
- 15 minutes for the Pierrade
grill functions
- 10 minutes for the pancake plate
For the first ten uses put a little cooking oil on
the Pierrade
®
cooking stone after preheating
and wipe off with a soft cloth. This prevents the
food sticking too much to the stone (according
to model).
Cooking (according to model)
After preheating, the appliance is ready for use.
Raclette function:
Each person places a slice of cheese in their
mini-pan (L) before placing it in the appliance.
Leave the cheese to melt, 3 to 5 minutes,
thermostat (according to model) on position 6.
When the cheese has melted, slide it onto a
plate.
According to model, a mini-pan rest (M) allows
the empty mini-pans (L) to be stored during
the meal.
Never leave the mini-pan to heat if empty.
Pierrade
®
cooking stone function:
Set the thermostat (according to model) to the
position of your choice.
Whilst in use, because of its composition, it
takes 5 to 10 minutes for the Pierrade
stone to respond to a change in thermostat.
Each person places slices of meat, fish,
vegetables or fruit on the stone to cook to their
taste.
Season to taste on your plate, accompanied
with cold sauces, a salad and potatoes.
Never place frozen or heavy food on the hot
stone.
37
®
cooking stone or
®
cooking