Satco NUVO 62-1402 Instructions D'assemblage Et De Montage

ASSEMBLY AND MOUNTING INSTRUCTIONS
PLEASE READ THE ASSEMBLY INSTRUCTION SHEET CAREFULLY BEFORE PROCEEDING. Carefully unpack
and identify all parts prior to building the unit. Each part is identified on the drawing for reference.
DO NOT DISCARD THE ORIGINAL PACKAGING. If after careful inspection, you must return the item for any
reason. Please repack the unit using the original carton and inserts.
STEP 1: Unpack all the parts and classify them according
to the illustration shown. Place the parts on a scratch
free surface.
STEP 2: Secure the glass panel and decorative bar to the
fixture using the mounting screws.
STEP 3: Drill 2 holes in a proper position of the wall, put
bolts in it, using wooden screws to secure the mounting
bar to the wall.
STEP 4: Make sure the power is turned off at the wall
outlet box where the fixture is to be installed. Secure
the mounting bar to the wall junction box using the
mounting screws.
STEP 5: Use the wire connection to connect the positive
and neutral wires. Connect the ground wire to the junction
box ground port.
STEP 6: Secure the fixture to the mounting bar using the
mounting screws.
STEP 7: Turn on the power at fuse or circuit box.
CAUTION:
To reduce the risk of fire, use the specified lamp wattage (or smaller) and bulb type identified on the product.
CLEANING INSTRUCTIONS:
Do not use polish or cleaners on your product. Just wipe clean with a soft cloth.
CAUTION – RISK OF FIRE
This product requires installation by a qualified electrician. Before installing be sure to read all instructions
and TURN THE POWER TO THE ELECTRICAL JUNCTION BOX OFF.
ITEM NO: 62-1402
Mounting Screw
Bolt
Wooden Screw
White Wire Connection
Outlet Box
Black Wire Connectiion
Ground Screw
Outlet Box Screw
Universal Circle Cross Bar
Glass Panel
ITEM NO: 62-1402
ARTÍCULO Nº: 62-1402
ARTICLE N°: 62-1402
Body