Publicité
Les langues disponibles
Les langues disponibles
1 - SAFETY WARNINGS
WARNING - for the safety of people, it is important to follow these instructions and save them
for future use.
Read the instructions carefully before starting installation. The design and manufacture of the devices
making up the product and the information contained in this manual comply with safety regulations.
However, wrong installation and programming may cause serious physical injury to those who perform
the work and those who will use the device. For this reason, during installation, it is important to
carefully follow all instructions in this manual.
2 - INTRODUCING THE PRODUCT
INFRARED PHOTOCELLS
The photocells of the SAFE series are devices applicable to the automation of doors and gates, which
allow to detect the presence of obstacles along the route between transmitter and receiver.
Warning: any use other than the one described, and carried out under environmental conditions
other than the ones described in this manual, is to be considered improper and prohibited.
CODE
DESCRIPTION
SAFEDUO
Pair of outdoor photocells (80x30x28mm).
2.1 - TECHNICAL SPECIFICATIONS
Range
Degree of protection
Power supply
RX consumption
TX consumption
Relay contacts maximum current
Relay contacts maximum voltage
Operating temperature
* full power / weakened
2.2 - MAIN COMPONENTS
• Opto-electronic circuit container
• Anti-blinding diaphragm
• Opto-electronic circuit
3 - PRELIMINARY CHECKS
WARNING - Before installing this product, verify and check the following steps:
• Make sure that the surface where the device is going to be secured is solid and does not allow
vibration
• Use electrical connections suitable for the electric requirements
• Verify that the power supply complies with the technical characteristics
SAFEDUO
25 m / 8 m*
12 ÷ 30 Vac 12 ÷ 40 Vdc
1 A Resistive load
-20° +55°C
• Fixing screws
• Cover with infrared screen
IP54
27 mA
10 mA
24 Vdc
EN
Publicité
