Publicité
Les langues disponibles
Les langues disponibles
4. Settings (continued)
Process settings screen (continued)
Item
Noise sup.
Gamma
Level
When
"ADJUST" is
selected.
Nega
DSP bypass
E36
All manuals and user guides at all-guides.com
Set Value
LOW
Used to reduce noise in the video signal.
MIDDLE
LOW/MIDDLE/HIGH : Noise reduction is performed.
HIGH
Amount of reduction is increased in the order of LOW
[OFF]
MIDDLE
OFF:
MEMO
Note that details in fine sections of the image may get lost
as the noise reduction amount is increased.
[NORMAL]
Used to set whether the gamma curve to determine the
ADJUST
reproduction of black is to be the standard value or
customised.
NORMAL:
ADJUST:
0.35
The gamma curve can be adjusted only when gamma is
:
set to ADJUST.
(0.01 step)
Increase the number:
[0.45]
:
(0.05 step)
Decrease the number: Improves the gradation of black
:
0.90
1.00
ON
Selects whether the camera image should be negative
[OFF]
signal.
ON: Conversion to negative signal is made.
OFF: Conversion to negative signal is not made.
[NORMAL]
Selects whether DSP (Digital Signal Processing) should
BYPASS
be bypassed.
NORMAL: Not bypassed.
BYPASS: Bypassed. In this case the following setting
Contents
HIGH.
Noise reduction is not performed.
the gamma curve is set using the standard
value (0.45)
set when changing the gamma curve
Improves the gradation of bright
areas. However, the gradation of
black becomes poorer.
areas. However, the gradation of
bright areas becomes poorer.
items are fixed as indicated and cannot be set.
• Detail:
OFF
• Level dep.:
– – –
• Noise sup.: OFF
• Gamma:
1.00
• Nega:
OFF
• Pixel comp.: OFF
• Color matrix: OFF
Publicité
