BERNSTEIN DUSCH-WC 540 Instructions D'installation Et Mode D'emploi page 31

SHOWER TOILET 540 / 540
CLEANING AND MAINTAIN
Lid and seat cleaning
1. Clean the lid and seat with a sponge or
a damp cloth with soap or mild detergent.
Ceramic body cleaning
1. Clean the ceramic toilet bowl with a toilet brush
and a specied cleaning detergent.
Removing the electronics/drive unit for maintenance purposes
1. In the event of maintenance, the power supply
must be disconnected before removing the
electronic drive unit.
2. If you do not use the unit for a longer period
of time in winter, drain the water in the heater
to prevent reezing (see illustration on the right).
NOZZLE CLEANING
1. Press the posterior cleaning button and
intimate cleaning button after 2 second
to make the nozzle extends out o the
machine,then remove the nozzle.
Please never immerse or rinse the unit in water as there is a risk of electric shock or damage to the unit.
Please do not use hydrogen chloride detergents, thinners, pesticides and other non-neutral detergents to
clean the product and do not use sandpaper or rough cloths to scrub it.
560 / 560
Pro -
Water tank discharge
mechanism
2. Wipe the nozzle and spray rod by
the toothbrush, sponge, or smooth
cloth with soap or mild detergent.
Pro
Lid
Seat
Heater drainage
mechanism
3. Ater installing the nozzle, press the
stop button or press the posterior
cleaning button & bidet button after
2 second, the nozzle will be automatic
retraction into the machine.
Ceramic
body
15