BERNSTEIN DUSCH-WC 540 Instructions D'installation Et Mode D'emploi page 26

Shut-o valve
Outlet water hose
Mounting block
7. Put the toilet seats set on the top o ceramic body
and then open the upper cover, astened by xing
screw and then put the decoration panel.
9. Insert the power plug into the waterproo
socket with corresponding voltage.
Ater conrming that the power plug is inserted,
press the reset key, and the indicator light will
light up, indicating normal power on;
After power on, you can hear the system
buzzer „tick".
10
SHOWER TOILET 540 / 540
Pro -
6. Attach outlet water hose to the toilet.
SHOWER TOILET 540 / 540
SHOWER TOILET 560 / 560
8. When nish the installation, remove the
packaging toward the arrow direction.
The remote control panel is installed in
the distance from the ground around
1600mm or convenience.
It works when light on
after pressing power
plugthe reset button.
There will be sounded
after connected to
power.
560 / 560
Pro
Pro
Decorative cap
Screw rod
Fixing hole
Pro
Decorative cap
Screw rod
Fixing hole
Test button
Reset button