Publicité
Les langues disponibles
Les langues disponibles
Amplify Key and Receiver
Tone Control
1.
While on a call using handset, press
extra level of amplification (25 dB) to the receiver volume.
This is indicated by the "Amplify" indicator under the front
window.
2.
While the
key is active, the
becomes active. Experiment different tone and volume
settings for best voice clarity. As a rule, use the same tone
setting on future calls. (Note: Tone control does not work in
speakerphone).
3.
Hang up handset to end the call.
Programming a One-Touch
Memory
1.
While off-line, press
number.
2.
Press a One-Touch memory key to save.
3.
Repeat Steps 1 and 2 for other One-Touch memories.
All manuals and user guides at all-guides.com
key to add an
control also
key and then enter phone
Auto "Amplify" Switch
This switch is located on the bottom of the phone, and it
determines the initial condition of the AMPLIFY function.
If this switch is set to ON, the
time you lift the handset off its cradle. (When this key is
activated, an extra level of amplification is added to the receiver
volume and tone control also becomes active). This setting is
recommended if this phone is only used by a single user.
If this switch is set to OFF, the user must manually press the
key in order to activate the extra receiver volume. This
setting is recommended if this phone is share by two or more
users.
Dialing from a One-Touch
Memory
1.
Lift handset, press a one-touch memory key to select.
There will be audio confirmation if the "Talk-back" feature is
enabled.
2.
Hang up handset to end the call.
English
key will be active each
Publicité
