Uline H-7646 Instructions D'assemblage page 2

2. Using 10 mm wrench and Phillips screwdriver,
assemble front and back supports with eight Phillips
head bolts and M6 flange nuts. (See Figure 2)
Figure 2
3. Remove drawer from desk top. Place desk top on
a smooth, non-marring surface with top side facing
down. Flip base frame upside down and place
onto desk top. Using a 10 mm wrench and Phillips
screwdriver, fasten desk top to frame with 16 Phillips
head bolts and M6 flange nuts. (See Figure 3)
Figure 3
PAGE 2 OF 9
All manuals and user guides at all-guides.com
ASSEMBLY CONTINUED
4. Set desk top assembly upright and recheck all
screws and nuts for tightness. (See Figure 4)
Figure 4
TOP SHELF ASSEMBLY
1. Place top shelf on desk top and assemble with six
Phillips head bolts and M6 flange nuts. (See Figure 5)
Figure 5
0721 IH-7646