Afriso EURO-INDEX PrimoTherm 180-1 DN25 Notice Technique page 60

EN
5.5.2 Wall mounting
Verify that the enclosed dowels are suitable for the intended wall.
Fig. 9: Mounting the product to a wall
24
A
PrimoTherm® DN25
Mounting
1. Verify that the wall can carry the
product.
2. Remove the upper insulation.
3. Hold the product to the wall and
align it with a level.
4. Draw six marks.
5. Interconnect the opposing marks.
6. Drill holes (Ø 10 mm) at the posi-
B
tion of the two centre marks (B).
7. Mount the product using the
enclosed dowels and screws (A).
- long hanger bolt at the top
- short hanger bolt at the bottom