Afriso EURO-INDEX PrimoTherm 180-1 DN25 Notice Technique page 45

4 Product description
The product is a pre-assembled, tightness-tested and heat-insulated heating
pump assembly which allows for the installation of standard pumps (with
G1½ connection and a length of 180 mm). The flow can be connected at the
left or the right side. Optional temperature probes can be mounted to all ball
valves.
4.1 Overview
1
A
F
Fig. 1: PrimoTherm® 180-2 DN25 components
Product description
2
1. Return
2. Flow
B
A. Ball valve, can be shut off,
with thermometer blue
and gravity brake
B. Ball valve, can be shut off,
with thermometer red
C. Circulation pump (various
manufacturers)
C
D. Ball valve
E. 3-way mixer with actuator
F. Insulation
D
E
PrimoTherm® DN25
EN
9