Skil 2810 Consignes De Fonctionnement/Sécurité page 8

SM 2610948764 04-07
CHARGING BATTERY PACK (STANDARD CHARGER)
Plug charger cord into your standard power
outlet, then slide battery pack into charger
(Fig. 4). The charger's green light will turn
"ON". The green light remains ''ON'' as long as
charger is plugged in, and does not shut off.
After normal usage, the battery pack requires
approximately 3 hours or less charging time
to become fully charged. If the battery pack
FIG. 4
CHARGER
Plug charger cord into your standard power
outlet, then slide the battery pack into charger
(Fig. 5).
The charger's green indicator will begin to
"BLINK". This indicates that the battery is
receiving a fast charge. Fast-charging will
automatically stop when the battery pack is
fully charged.
When the indicator light stops "BLINKING"
(and becomes a steady green light) fast
charging is complete.
BATTERY
PACK
4/25/07 9:02 AM Page 8
All manuals and user guides at all-guides.com
INDICATOR LIGHT
CHARGING BATTERY PACK (FAST CHARGER)
FIG. 5
-8-
is run-down completely, it may require up to
5 hours charging time to become fully
charged.
When the battery pack is fully charged,
unplug the charger (unless you're charging
another battery pack) and slide the battery
pack back into the tool handle.
When you begin the charging process of the
battery pack, a steady green light could also
mean the battery pack is too hot or too cold.
The purpose of the light is to indicate that the
battery pack is fast-charging. It does not
indicate the exact point of full charge. The
light will stop blinking in less time if the
battery pack was not completely discharged.
When the battery pack is fully charged,
unplug the charger (unless you're charging
another battery pack) and slip the battery
pack back into the tool handle.
CHARGER
BATTERY
PACK
INDICATOR
LIGHT