Télécharger Imprimer la page

Dockin D CUBE Manuel D'instructions page 4

Publicité

Les langues disponibles
  • FR

Les langues disponibles

TURNING OFF
Press the
button on the top side of your D CUBE and hold for 3
seconds to turn off.
AUX MODE
Connecting your D CUBE to your device using the 3.5mm AUX cable.
Startup:
1.
Connect your device using the provided 3.5mm stereo cable to
the AUX input of your D CUBE.
2. Start playback on your device.
The D CUBE power saving mode is disabled, when an AUX cable is
connected. When both AUX cable and Power In are connected your
D CUBE can be used stationary, e.g. as a PC speaker or TV soundbar.
STEREO LINK FUNCTION
Pairing two Dockin D Cube:
1.
Connect your Bluetooth playback device to one of the speakers
the usual way (see above)
2. Press the
-button twice on both speakers. This will enter ste-
reo link mode.
3. After a short time both units will be paired and a confirmation
sound can be heard. The left channel will have a higher pitched
sound playing after the initial confirmation for identification.
4. Start the music on the playback device. Both D CUBE speakers
will play back sound now.
6
All manuals and user guides at all-guides.com
The controls and volume changes are applied to both devices in Ste-
reo Link Mode.
The pairing information is stored. This will automatically reconnect
the speakers the next time they start up. The left / right assignment
is saved as well.
By pressing the Power button twice on one of the two D CUBE the
Stereo Link Function is disabled and playback is continued with only
one speaker.
CHARGING
Charge your D CUBE by using the provided power cable. The
charging input is located behind the cover on the side.
During charging the LED is green. Once the device is completely
charged, the LED turns off.
Charging can be done with the supplied USB C charging adapter
and also with any USB C charger, the speed of the charging will de-
pend on the output specification. The supplied charger has an out-
put of 5V and 2A (Model HNBM050200UX)
POWER SAVING FUNCTION
If there hasn't been any signal transmission or charging via the USB
output for 15 minutes, your D CUBE turns off automatically. If the
AUX cable is connected the power saving function is disabled, which
allows stationary use.
20%
50%
> 50%
7

Publicité

loading