Grundig MT 5210 Manuel D'utilisation page 24

OPERATION ___________________________
All manuals and user guides at all-guides.com
Note:
The vertical trimming head
5
be used for nose hair removal as
well.
Removing hair from
eyebrows
1
Ensure that the appliance is
switched off.
2 Attach the vertical trimming head
.
C
Notes
For trimming attach the eyebrow
5
comb attachment
cal trimming head
Depending on the direction of
5
the eyebrow comb attachment,
its cutting length will be either 3
or 5 mm.
To remove hairs completely use
5
only the vertical trimming head
4
To turn the appliance on, turn the
On/Off switch
5
Gently guide the cutting unit over
the area of unwanted hair along
the eyebrow line or the eyebrow
itself.
24 ENGLISH
can
C
on the verti-
D
.
C
to the right.
B
Caution:
Do not apply excessive pressure as
5
this damages the attachment and
may cause skin injury.
6
To turn the appliance off, turn the
On/Off switch
Removing hair from ear
1
Ensure that the appliance is
switched off.
2 Attach the vertical trimming head
.
C
3 To turn the appliance on, turn the
On/Off switch
4
Insert the cutting unit gently into the
ear.
Caution
Do not insert the appliance too far
5
into the ear during use.
5
Gently move the cutting edge in
.
C
and out of the ear while rotating
the appliance.
6
To turn the appliance off, turn the
On/Off switch
Note:
The rotating head
5
for ear hair removal as well.
to the left.
B
to the right.
B
to the left.
B
can be used
E