ASROCK B150M Pro4/Hyper Mode D'emploi page 19

All manuals and user guides at all-guides.com
2.4 Expansion Slots (PCI and PCI Express Slots)
There are 1 PCI slot and 3 PCI Express slots on the motherboard.
Before installing an expansion card, please make sure that the power supply is
switched off or the power cord is unplugged. Please read the documentation of the
expansion card and make necessary hardware settings for the card before you start
the installation.
PCI slot:
The PCI1 slot is used to install expansion cards that have 32-bit PCI interface.
PCIe slots:
PCIE1 (PCIe 3.0 x16 slot) is used for PCI Express x16 lane width graphics cards.
PCIE2 (PCIe 3.0 x1 slot) is used for PCI Express x1 lane width cards.
PCIE3 (PCIe 3.0 x16 slot) is used for PCI Express x4 lane width graphics cards.
*If PCI or PCIE2 slot is occupied, M2_1 slot will support M.2 PCI Express module
up to Gen3 x2 (16 Gb/s).
PCIe Slot Configurations
Single Graphics Card
Two Graphics Cards in
TM
CrossFireX Mode
For a better thermal environment, please connect a chassis fan to the motherboard's
chassis fan connector (CHA_FAN1 or CHA_FAN2) when using multiple graphics
cards.
PCIE1 PCIE3
x16 N/A
x16 x4
B150M Pro4/Hyper
17