Publicité
Les langues disponibles
Les langues disponibles
Electrical Requirements 120 V~, 60 Hz, 1 A (loaded)
Speed
Dust Chute
Dimensions
Finishing Sander Pads
Weight
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
READ AND uNDERStAND All INStRuctIONS
Failure to follow all instructions listed below may result in
1.
Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents. Make sure there is adequate surrounding workspace.
Do not operate power tools in explosive atmospheres, such as in the pres-
2.
ence of flammable liquids, gases, or dust. Power tools create sparks which may
ignite the dust or fumes.
3.
Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
Grounded tools must be plugged into an outlet properly installed and grounded
1.
in accordance with all codes and ordinances. Never remove the grounding
prong or modify the plug in any way. Do not use any adapter plugs. check with
For technical questions, please call 1-800-444-3353.
SKU 42864
All manuals and user guides at all-guides.com
SpEcIFIcAtIONS
12,000 OPM (Orbits Per Minute)
1-1/4" OD
4" W x 4-3/4" L x 5-3/4" H
Dimensions: 3-1/2" W x 7-3/8" L
Sold separately as Item 91063 - a 15 pack
with 5 each of 80, 150, & 240 grit
2.5 lb.
SAVE tHIS mANuAl
GENERAl SAFEty RulES
wARNING!
electric shock, fire, and/or serious injury.
SAVE tHESE INStRuctIONS
wORK AREA
ElEctRIcAl SAFEty
E194601
Page 2
Publicité
