Acuva SOLARIX Mode D'emploi page 10

ENGLISH
All manuals and user guides at all-guides.com
INDICATOR STATUS
ON/OFF Button
OFF (no light)
White
Orange
Blinking Red
Blue
Red
Charging Indicator
Blinking Green
Solid Green
OFF
10
Comments to User
Safety sliding switch is ON, SOLARIX is
being charged, or battery is extremely low.
Device is idle and awaiting user input.
Button blinks when the hinge is open
and the SOLARIX is ready to use.
Device is idle and awaiting input, but
battery is low - button blinks when the
hinge is open and the SOLARIX is ready
to be used.
Battery is too low to use; the SOLARIX
cannot be used until the battery is
charged
The device is active and the UVC LEDs
are on.
Button blinks when battery is low.
UVC LED fault detected - ACUVA lettering
and blue indication LEDs turn off..
Comments to User
USB Plugged into Device.
SOLARIX is in the process of charging
the battery.
The SOLARIX battery is fully charged.
No USB power has been applied.
SolarIX USer'S ManUal