Asus T5 Serie Manuel D'installation page 7

Installing an expansion card
1. Locate and remove one metal bracket lock screw.
. Remove the metal bracket lock.
3. Align the card connector with the slot, then press firmly.
4. Secure the card with one screw.
5. Replace the metal braket lock, then secure it with one screw.
1
IMPORTANT. This chassis supports PCI Express x 16 cards with 19mm x 19mm or
smaller dimensions only.
Installing a hard disk drive
1. Connect the SATA signal (1A) and power (1B) plugs to the connectors at the
back of the SATA hard disk drives.
. Locate the HDD tray.
3. Insert a hard disk drive (with the HDD PCB facing the top of the chassis) to
the tray, then secure it with four screws.
4. Connect the SATA signal cable to the SATA connector on the motherboard, and
tighten all the cables with the plastic coils.
a5335_T5_series_qsg.indb 7
All manuals and user guides at all-guides.com
4

SATA
1A
1B
Installation manual
3
3
3
5
7
/5/10 3:0:19 PM