Publicité
Les langues disponibles
Les langues disponibles
SV 1600
ATTENTION. Hot surface. The surface can
•
become hot during operation
Do not allow the cord to come into contact with the
•
soleplate when it is hot.
When you have finished ironing, when you clean the
•
appliance, when you fill or empty the water tank and also
when you leave the iron even for a short while: set the steam
control to position 0, put the iron on its heel and remove the
mains plug from the wall socket.
FIRST USE
• Clean the soleplate with a damp cloth.
• Fill the water tank through the filler opening (6). Help yourself with a container filling. If possible,
use distilled water or tap water to clear the water hardness 2. If your water has higher grades, use
only distilled water.
• Water battery water from the clothes dryer and water with additives (such as starch, perfume,
fabric softeners and other chemicals) should not fill in the water tank. The device will be
damaged, as this may result in residues in the steam tank. These residues, to escape the steam
outlet openings, could dirty clothes ready for ironing.
HANDLING THE PRODUCT
• Attention: only iron clothes with this device.
• Remove the possible anti-abrasion labels that may have the product in the soleplate of before
using the appliance leaves.
• Please unwind the cable completely.
IRON WITHOUT STEAM (REGULATED STEAM IN POSITION "
− Place the unit on top of the base.
− Set the regulator of the amount of steam (4) to the position "
− Always set the temperature control to "0" position before connecting the appliance to the socket.
− Select the clothes iron temperatures. Start with the lowest temperature. Adjust the temperature
with the temperature regulator (1):
•
Synthetic, silk low temperature
• •
Lana average temperature
• • •
Cotton, linen high temperature
− Lamp lights (2). When you turn the temperature has been reached board. Now you can start
ironing.
− After each use, remove the plug from the socket.
All manuals and user guides at all-guides.com
"
)
".
11
Publicité
