Uline OHAUS DEFENDER 5000 Mode D'emploi page 7

AVERAGE PIECE WEIGHT (APW)
When the FUNCTION MODE button is
released, is displayed.
CLr.PW Pcs
CLEARING A STORED APW
1. Press the YES button to clear the stored APW.
RECALLING A STORED APW
1. Press the NO button to recall the existing APW.
NOTE: Press the FUNCTION
MODE button to temporarily
display the APW value.
2. The display shows the sample size
Pcs.
PUt 10
ESTABLISHING A NEW APW
1. Press the NO button to increment
the sample size. Choices are 5, 10,
20, 50 and 100.
2. To establish the APW, place the specified quantity
of samples on the scale and press the FUNCTION
MODE button to capture the weight.
3. APW
is displayed shortly followed
by the APW value with the current
unit of measure.
BEGIN COUNTING
1. Place the parts on the scale and
read the count. If a container is
used, be sure to tare the empty
container first.
PERCENT WEIGHING
Use this mode to measure the weight
of a sample as a percentage of a
reference weight.
PAGE 7 OF 32
All manuals and user guides at all-guides.com
OPERATION CONTINUED
REFERENCE WEIGHT
When the FUNCTION MODE button is
released,
CLEARING A STORED REFERENCE WEIGHT
1.
RECALLING A STORED REFERENCE WEIGHT
1.
APW
Pcs
0.123 kg
ESTABLISHING A NEW REFERENCE WEIGHT
The display shows
1. To establish the reference weight,
BEGIN PERCENT WEIGHING
1.
CHECK WEIGHING
Use this mode to determine if
the weight of a sample is within
APW
prescribed limits.
Pcs
CHECK WEIGHING LIMITS
When the FUNCTION MODE button is
released,
CLEARING STORED CHECK WEIGHING LIMITS
1.
RECALLING STORED CHECK WEIGHING LIMITS
1.
PErCNt
is displayed.
CLr.rEF%
Press the YES button to clear the stored reference
weight.
Press the NO button to recall the existing reference
weight.
NOTE: Press the FUNCTION
MODE button to temporarily
display the reference weight.
Put.rEF %
place the sample on the scale
and press the FUNCTION MODE
button to capture the weight.
is displayed shortly
rEF.Wt
followed by the value with the
current unit of measure.
Place the sample on the scale
and read the percent value. If a
container is used, be sure to tare
the empty container first.
is displayed.
CLr.rEF
Press the YES button to clear the stored limits.
Press the NO button to recall the
stored limits.
NOTE: Press the FUNCTION
MODE button to temporarily
display the under and over
limit values.
CLr.rEF
kg
0.123
.
Put.rEF
rEF. t
kg
12.345
. 100.00
CHEC
kg
CLr.rEF
kg
110.000
kg
120.000
0521 IH-2289
%
%
%