mysoda SUPERNOVA Manuel D'instructions page 15

All manuals and user guides at all-guides.com
INSTALL CO CYLINDER
2
1
Remove the carbonating
bottle by pulling it towards
you, and then unscrew it.
4
If you use with the Car-
bonating Unit a CO Cyl-
2
inder that exceeds 60 L,
remove the unit's Cylinder
Adaptor. Otherwise, keep
the Cylinder Adaptor in
place. Remove the plastic
seal from the top of the
CO Cylinder and push
2
the Cylinder into the unit
through the opening in the
bottom.
2
Remove the rear cover.
5
Screw the CO cylinder to
2
tighten it.
3
Unscrew the black pin
protective cap.
6
Replace the rear cover.
ENG
15