Rettig ULOW-E2 Notice D'utilisation page 19

Boost
COMMISSIONING THE RADIATOR CONTROLS
The E2 low temperature radiator control is started up by pressing the
ON/OFF button
IMPORTANT WHEN COMMISSIONING:
!
When starting up the radiator for the first time, you must ensure that
the radiator control is set to Heating mode with the target room
temperature pre-set to 22 °C.
VARYING THE TEMPERATURE WHEN IN HEATING
MODE:
The desired room temperature can be set to between 18 °C and 26 °C in
increments of 0.5 °C. As the thermostatic head acts as the main control
when in Heating mode, the settings on the operation control touch pad are approximate
values that should be increased or decreased slightly as desired depending on the instal-
lation position or operating conditions.
BOOST MODE:
To attain the desired room temperature in the shortest possible time, maximum radiator
output can be triggered using "Boost mode" simply press the Boost button (9) , – this
lasts for 2 hours. As soon as the desired room temperature is reached, Comfort mode will
automatically be activated again. Boost mode can be turned off at any time by pressing
the Boost button (9) again.
Boost
.
1 9
Boost