Samsung SCC-B1331 Guide De L'utilisateur page 21

All manuals and user guides at all-guides.com
The LEVEL menu is used to adjust the
overall brightness, where "+" will increase the
brightness and "–" will decrease it.
② If you set the BACKLIGHT option to BLC,
you will see a menu where you can set the
BLC area.
you can set the desired BLC zone by defi ning
the size and location.
ALC
LENS
LEVEL [00]----I----
BACKLIGHT
AREA
<SIZE>
<LOCATION>
If you use an ordinary camera in a scene
with an intensive backlight, the object will be
displayed dark on the monitor affected by the
backlight. To solve this problem, you can use
the BLC(Back Light Compensation) function
to improve the sharpness of the image in
such a high contrast scene.
–
• ELC (Electronic Light Control)
① If you press the SETUP switch when the ELC
submenu is selected, the corresponding screen
appears. You can make the ELC (Electronic Light
Control) function active or not.
How to use OSD Menu
DC
BLC
USER
ELC
LEVEL
BACKLIGHT
② In similar to ALC setting, you can specify the
BLC area.
ELC
LEVEL
BACKLIGHT
AREA
<SIZE>
<LOCATION>
❖
AGC
[OFF, VERY LOW, LOW, MID, HIGH, VERY
HIGH, USER]
The AGC (Auto Gain Control) menu is used to
set the AGC level of the camera. When the AGC
is active, the camera automatically increases the
sensitivity by amplifying the Video signal when
the strength of the signal falls below the normal
value.
If you press the SETUP switch with a USER
sub menu selected, you will see the appropriate
screen.
[00]----I----
OFF
[00]----I----
BLC
USER
English 17
–