Publicité
Les langues disponibles
Les langues disponibles
Safety regulations
The Manufacturer declines any responsibility for failure to respect the Safety Regulations and
the prevention as described below. Furthermore, the Manufacturer declines any responsibility
for damage caused by the improper use of the unit and/or modifications carried out without
proper authorisation.
• Qualified personnel must carry out the installation.
• During the installation operation, use protective clothing, for example: glasses, gloves, etc. as indicated
by 686/89/CEE and successive regulations.
• During the installation operate in absolute security, pollution free air and in an area free of obstructions.
• Respect the regulations in force in the country in which the apparatus is being installed. Specifically
relative to its use, and to the disposal of packing and products used for the cleaning and maintenance
of the unit. Respect the recommendations given by the producers of such products.
• Before placing in function the unit, check the perfect connection of the various components and the
internal parts of the system.
• Avoid at all costs human contact with moving parts and contact with the parts themselves.
• Do not commence with servicing or cleaning of the unit, before the unit has been disconnec-
ted from the main supply.
• The maintenance and the substitution of damaged or consumed parts must be carried out only by
specialised personnel, following the indications found within this manual.
• Spare parts must correspond to the requirements specified by Manufacturer.
• In case of dismantling of the unit, respect the anti-pollution regulations in force.
N.B: The installer and the user of the apparatus must take into account, and solve problems, connected
with any other type of risk that may occur to the unit. For example, risks derived from the entrance of
foreign bodies, or risks due to the presence of flammable or toxic gas.
Preliminary operations
• Check the perfect condition of the various components of the unit.
• Control that contained within the packing, there are the installation accessories, and documentation.
• Transport the packed section as close as is possible to the intended place of installation.
• Do not place tools or weight on top of the packed unit.
• Once that the unit is installed, check that the impeller turns free of friction.
Choosing place of installation
• Position the unit on a solid structure that will not vibrate, and is capable supporting the weight of the
machine.
• Do not position the unit in an area in which flammable gases, acidic or corrosive substances are pre-
sent. They may damage various components in an irreparable manner.
• Allow a minimum of free space of 700 mm for each side, depending the type and size of the unit. This
permits ease of installation and maintenance.
• For long life time equipment, we recommended that the working conditions in continuous operation will
not exceed 40ºC and 60% humidity.
All manuals and user guides at all-guides.com
11
Publicité
