Publicité
Les langues disponibles
Les langues disponibles
Entries:
Mic input/micro SD card input/USB input
Settings:
Set micro volume/echo bass/treble/General volume
The EQ function only works in the USB or TF card mode.
MIC PRI:Microphone priority, to override and reduce the sound from the speaker input and
give the microphone sound priority.
Pause/play:
-Play or stop the sound in USB/Micro SD/BT mode.
-In FM mode, short press it for auto scan and auto store all the stations after stopping scan.
Note: in LINE IN/AUX-in mode, this button has no function.
MODE
-Press briefly to enter line mode (aux-in)/USB/Micro SD/FM radio/wireless BT
-Short press this button to enter to BT mode, the display shows 'BLUE' and have a tone'
Bluetooth mode' coming out, it means in pairing mode.
ON YOUR PHONE:
1. turn on the wireless audio feature on your device (Smart phone, Tablet, etc.)
2. Select Sylvania SP917 from the list of found devices
3. Tap to connect it, there will have a tone ' Bluetooth is connected' after connected
successful.
4.If required , enter the password 0000 to confirm to paring.
5. You are ready to listen to your music.
FM RADIO function
-Turn on the power and press the MODE button repeatedly to select the FM function (the
frequency is displayed on the display).
-Press the play button to activate the automatic memorization (the tuner searches for
stations available and memorizes automatically). The number of memorized stations
depends on the reception in your area.
-Use the next/previous buttons to listen to the memorized stations.
-To select a memorized station directly, press the corresponding numeric key on the remote
control.
Publicité
