KitchenAid KSBC1B0 Mode D'emploi page 6

USING THE COMMERCIAL BLENDER
PREPARING THE COMMERCIAL BLENDER FOR USE
Before using the Blender, be sure
the countertop beneath the Blender
and surrounding areas are dry and
clean. Be sure the power switch on
1
the back of the blender base is in the
OFF (O) position and the cord is also
fully plugged into the back of the
Blender. Then, plug the Blender into a
grounded 3 prong outlet.
The cord cleat is not to be used
NOTE:
as a handle; the cord cleat is designed
to wrap the power cord around it for
storage only.
6 | USING THE COMMERCIAL BLENDER
All manuals and user guides at all-guides.com
Before first use
Before using your Blender for the first time,
wipe the blender base with a warm damp
cloth, then wipe clean with a damp cloth.
Dry with a soft cloth. Wash the blender
jar, lid, and ingredient cup in warm, sudsy
water (see "Care and cleaning" section).
Rinse parts and wipe dry.
2
The main power switch is on the
back of the blender base. Flip the
POWER switch to the ON (I) position.
The status indicator light above the
Start toggle button will begin to
flash, indicating that the Blender is in
Standby mode. The Blender is now
ready to operate.