Set Up - RedMax BCZ3050S Mode D'emploi

6. Set up

Tighten the screws gradually by turns.
■ INSTALLING HANDLE
SE1
• Mount the handle to the shaft tube and
clamp it at a location that is comfortable
to you. (SE1)
(1)
(1) About 19 inches (48cm)
[BCZ3050S]
(2) About 14.5 inches (37cm)
[BCZ3050T]
[BCZ3050SW]
■ HIP PAD
SE2
• Fix the tube by the band. (SE2)
(1)
(1) Band
■ INSTALLING CUTTING ATTACHMENT
SE3
GUARD
• Put the cutting attachment guard on the
braket, attach it with the 2 screws.
(SE3)
[BCZ3050SW]
2 kinds of cutting attachment guard are
packed in with BCZ3050SW. Choose the
guard suitable for a line head. If the right
(2)
(1)
guard is not used, it may lead to a serious
accident. (SE3)
[BCZ3050S]
(1) Guard for Line Head (Red) :
[BCZ3050T] (T3245-24110)
(2) Guard for Blade (Black) :
(T3246-24110)
IMPORTANT
IMPORTANT
■ INSTALLING LINE HEAD (SE4)
1. While locking the gear shaft, by
SE4
inserting the supplied tool into the
upper holder on the gear box, loosen
and remove the hexagon nut(left-
handed)
2. Fit the line head assembly to the gear
shaft over the holders. Hand-tighten it
securely.
IMPORTANT
• You need not holder (B) and nut when
installing the line head.
• Do not attach any metal blade to
BCZ3050T.
BCZ3050S/T/SW
U
S
US-9