Publicité
Check Tire Air Pressure
1. Tires are over-infl ated for shipping purposes. Check
tire air pressure with an accurate gauge. The maximum
pressure is stamped on the sidewall of the tires.
WARNING
•
Do not infl ate the tires above the maximum pressure.
•
Do not stand in front or over the tire assembly when
infl ating.
Check Oil Level
1. Place snowthrower on a fl at, level surface.
2. Remove oil dipstick. Oil level should be at top of
crosshatched area. Add oil if required (See Operator's
Manual). Reinstall oil dipstick.
6
All manuals and user guides at all-guides.com
Safety System Test
Amputation hazard
This snowthrower is equipped with several mechanical safety
systems designed to keep the operator safe while using the
unit. Check the operation of these systems regularly using
the safety system tests listed. If the unit fails to operate as
described, DO NOT operate it. See your authorized dealer
for service immediately.
Test 1 – Auger/Impeller Control
With the engine running:
Test 2 – Traction Drive Control
With the engine running and speed control in 1st gear:
Test 3 – Free Hand Control (units with Free
Hand control)
With the engine running:
For answers to your questions
about this product, call:
1-800-659-5917
Sears Craftsman Help Line
5 am - 5 pm, Mon - Sat
www.sears.ca/craftsman
WARNING
• Press down on the auger control lever. (The auger/
impeller should rotate.)
• Release the auger control lever. (The auger/impeller
should stop within 5 seconds.)
• Press down on the traction control lever. (The unit
should move forward.)
• Release the traction control lever. (The unit should stop.)
• Engage the auger and traction control levers, then
release the auger control lever. (Both controls should
remain engaged)
• Next, release the traction control lever. (Both controls
should release)
Publicité
