Télécharger Imprimer la page

Phil&Teds verve Instructions page 5

Publicité

IMPORTANT
• Always load/unload your children on level ground.
• Ensure the brake is engaged during the loading and
unloading of children.
• Care should be taken if the stroller is used on stairs
or escalators.
• Always use the safety strap.
• Excessive wear can reduce effectiveness and safety.
Parts may need lubrication. Inspect essential
components for:
• Fraying - especially webbing straps and safety
harness.
• Wear - locks, snap fasteners, tyres, plastic and
moving parts.
• Safety - locks must not be loose.
For rights & remedies, refer www.philandteds.com/warranty
All manuals and user guides at all-guides.com
Product Care / Conseils d'entretien / Produktpflege / Cuidado del producto / Productverzorging
Tyres & Tubes
The valve is car-size. Manually inflate to 20 – 22psi max.
releasing air gives a softer ride but lower pressure reduces
tread life.
New inner tubes and tyres are generally available (21/4" x
12 1/2" tyre) from your dealer, cycle or specialist wheel
shops. Standard tyre kits can repair punctures.
A flat tyre can result from grit holding the valve open;
to check: inflate tyre, deflate rapidly, and re-inflate.
Tyres and tubes are not under warranty. Do not over
inflate. Tyre pressure is affected by heat especially
when inside parked cars.
Rubber tyres can react with some surfaces (including, but
not limited to, vinyl floor coverings, carpets, synthetic
laminates, parquet and linoleum) and cause stains. Always
stand the stroller on a protective surface when indoors.
EVA Tyres
Tyres are not under warranty.
The verve™ uses EVA tyres on the front -
these are immune from punctures and eliminate the
need for tube replacements etc.
With use, the surface of the EVA tyre can show
signs of minor pitting - this is normal for this
material, and this does not affect performance of
the product.
VERVE™/VIBE™
IMPORTANT
5 5

Publicité

loading

Ce manuel est également adapté pour:

Vibe