Cleaner Maintenance - Candy CAS10GC Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
NOTE: The Safety protection system will action if the agitator has a blockage or is locked. Once actioned, the
agitator will stop rotating and the Blue LED on the handheld unit will turn red and begin to flash.
If this happens, simply switch off your product and clear the agitator obstruction. To resume cleaning, press the
on/off button and the product will restart in normal mode.
There are two working modes:
• TEMPORARY MODE: The product will start working when you press the on/off switch and stop when released. [3A]
• CONTINUOUS MODE: To enable continuous mode you can pull switch lever back and it will click into place. To disable
continuous mode you can push the switch lever forward. [3B]
Charging Indication: The handheld LED light keep red light during charging and turns into blue light when fully charged.
Discharging Indication: When the batteries are discharging, both handheld LED light and nozzle LED light are blue.
Handheld LED light will blink when the battery capacity is lower than 5%.
Crevice Tool / 2 in 1 Dusting Brush* / Long Rotation 2 in 1 Brush* / Mini-turbo Nozzle* / Long Flexible Crevice Tool*
You can insert the accessory directly into the air inlet of handheld unit or one side of the tube and heard a "click" sound. [5]
Only Crevice Tool and 2in1 Dusting brush can be stored on the docking station.
Accessory bag*:
Additional accessories can be stored in the accessory bag.
NOTE: The mini-turbo nozzle is ideal for deep cleaning textile surfaces (i.e. sofas) and pet hair removal. Move it steadily
backwards and forwards. After using, please remove hair / threads collected on the brush with scissors if necessary.
NOTE: The long flexible crevice tool is ideal for cleaning in hard to reach areas and underneath furniture.
Up to Top Tool*/Radiator Tool* /Deep Cleaning brush*
These accessory must be assembled with accessory adaptor for using.
You can insert the accessory adaptor directly into the air inlet of handheld unit or one side of tube and heard a "click" sound.
NOTE: The up to top tool can easily clean high and hard to reach places and delicate surfaces without scratching.
NOTE: The radiator tool is ideal for cleaning inside and around cabinets, radiators, couches, blinds and more.
NOTE: The deep cleaning brush is useful to clean in tight spaces without scratching surfaces.
IMPORTANT: After each use of your product, please ensure to push the switch lever forward to the unlocked position.
Failure to do so may result in a reduction in battery life or failure.

CLEANER MAINTENANCE

Emptying the Dust Container
1. Press the accessory release button and remove the tube. [4]
2. Push down the dust cup empty button to release the bin flap and empty the contains. [6]
3. Close the dust cup flap up, you will hear a click when fully locked.
NOTE: It is recommended to empty the dust cup after each use or when dust is up to the max fill line.
Cleaning the Dust Container and Filter
1. Press the accessory release button and remove the tube. [4]
2. Press the dust cup empty button to open the bin flap and empty it. [6]
3. Press the dust cup release button and also pulling the dust cup away in an downwards and outward direction. [7]
4. Turn the mesh filter to the anticlockwise direction to align the arrow mark and then it can be pulled out from the
cleaner. [8]
5. Turn the cyclone separator to the anticlockwise direction, align the arrow mark and then it can be pulled out from the
cleaner. [8]
6. Press the two exhaust filter release buttons simultaneously and then remove the exhaust filter. [9]
7. Wash the exhaust filter in lukewarm water and leave to dry for 24 hours. Reassemble once completely dry and refit
to the product. [10] [11]
8. Wash the dust cup/mesh filter/cyclone separator in lukewarm water. Ensure it is fully dry before returning to the main
body. [10]
9. Reassemble the handheld unit and then attach it to the docking station. [12]
NOTE: Do not use hot water or detergents when cleaning the exhaust filters. In the unlikely event of the exhaust filters
becoming damaged, fit a genuine Candy replacement. Do not try use the product without a filter fitted.
IMPORTANT: For optimum performance, always keep your mesh filter clean. We recommend that the filter should be
washed at least once a month.
* Certain Models Only
4
GB

Publicité

Table des Matières
loading

Table des Matières