Publicité
Les langues disponibles
Les langues disponibles
Trimmer
For paper dimensions: 334 x 240 mm (A4)
Trimmer with integrated cut selector switch and setting lock.
Cutting functions:
1. Straight cut
2. Perforation
3. Wave cut
The blades are accommodated in a protected housing.
A spare blade is contained in the integrated storage compartment.
7
Place the cutting unit on a stable, level base with the trimmer side fac-
ing up.
8
Slide the cutting head to one side of the guide rail (Fig. 4).
9
Place the material to be cut in the required position under the pressing
rail and hold the material in place with one hand when cutting.
Note: Hold the material to be cut securely, otherwise it could shift and
be cut inaccurately. The raster and measuring system on the trim-
mer's working surface serve as positioning aids.
10
Press the cutting head down and draw it to the other side of the guide
rail.
Note: To prevent a faulty cutting edge, DO NOT run the cutting head
back again but remove the cut material directly after completing the
cut.
All manuals and user guides at all-guides.com
Cutting capacity: max. 5 sheets (80g/m²)
Cutting capacity: max. 3 sheets (80g/m²)
Cutting capacity: max. 3 sheets (80g/m²)
Fig. 4
16
Publicité
