SOLAC Optima Center 2400 Mode D'emploi page 7

Connect the appliance to the mains.
•
Press both "PUSH" buttons to release the
•
appliance, after using, press lock button to fix
the appliance.
Connect the appliance to the mains, LED dis-
•
play light up with GREEN color.
Press ON/OFF button (1), product start
•
pre-heating, & on LED display light up with
RED color.
Press temperature button (3), select desired
•
temperature.
Press steam regulator button (2), select desi-
•
red steam control.
NOTE:
*At temperature dot ● it can not select steam
•
control.
*At temperature dot ●● it can only select steam
•
control (2) .
It takes about 40' for
•
that, it is fully ready to iron.
It is normal to hear a pumping sound as the
•
water is pumped into the steam station.
Do not use temperatures higher than those in-
•
dicated on the garments to be treated.
● Temperature for synthetic fibres (Polyester,
•
Nylon...)
●● Temperature for silk, wool.
•
●●● Temperature for cotton & linen
•
If garment has various kinds of fibres, select
•
the temperature for the fibre that requires the
lowest temperature. (For example, select the
temperature for polyester for an article made
out of 60% polyester and 40% cotton).
DRY IRONING:
The appliance has an option to dry ironing (wi-
•
thout steam). To use this option the tempera-
ture at dot 1 ●
CONTINOUS STEAM IRONING
It is possible to iron with continuous steam
•
whenever the tank is filled with water and the
adequate temperature is selected.
Select the temperature at ●● or ●●● .
•
Select the desired steam regulator.
•
heating process, after-
Press and hold steam button to release the
•
continuous steam.
CAUTION: This function can not work under
•
lower temperature dot ●.
BURST STEAM
The burst steam feature provides additional
•
steam for removing stubborn wrinkles.
Select the temperature at ●●●
•
Select the steam at (2).
•
Move the iron in a top to bottom direction while
•
double click steam button to release the burst
steam.
VERTICAL STEAMING:
It is possible to iron hanging curtains, items of
•
clothing on his hanger, etc. To do so, follow the
instructions:
Select the maximum temperature.
•
Pass the iron from top to bottom by pres-
•
sing the steam control with the material.
IMPORTANT: for cotton and linen, its recom-
•
mended to put the iron base in contact with the
material. For other more delicated fibres, it's
recommended to keep the iron base at some
centimetres of distance.
AUTO SHUT OFF FUNCTION
While the appliance does not have any opera-
•
tion, the appliance can be auto shut off after 8
mins., keep twinkling. Presing ON/OFF button
(1), it can reset.
ANTI-CALC SYSTEM
A special resin filter at the bottom of the wa-
•
ter tank softens the water and prevents scale
build-up in the plate.
Do not use chemical additives, scented subs-
•
tances or decalcifiers. Failure to comply with
the above-mentioned regulations leads to the
loss of guarantee.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE
Press button (1) ON/OFF during 3 seconds.
•
Disconnect the appliance from the mains,
•
empty the water tank (do it after each use) and
let it cool before undertaking any cleaning task.
(Original instructions)
EN ES