Télécharger Imprimer la page

SOLAC Optima Center 2400 Mode D'emploi page 6

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
ENGLISH
ESPAÑOL
DESCRIPTION
A Water tank
B Soleplate
C Power cord protector
D Steam button
E Buttons group
1
ON/OFF button
2 Steam regulator button
3 Temperature button
F LED display
G Lock system
H Unlock system
I Water inlet cover
J Filling cup
K Cable housing
If the model of your appliance does not have
the accessories described above, they can
also be bought separately from the Technical
Assistance Service.
USE AND CARE:
Fully extend the appliance's power cable be-
fore each use.
Before using the iron, do a self-cleaning cycle
following the corresponding instructions
Do not use the appliance if its accessories are
not properly fitted.
Do not switch the appliance on without water.
Do not use the appliance if the on/off switch
does not work.
Do not use the appliance if it is tipped up and
do not turn it over.
Do not use the unit if any of the start/stop devi-
ces do not work.
Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
Store this appliance out of reach of children
and/or persons with physical, sensory or redu-
ced mental or lack of experience and knowle-
dge.
Do not store or transport the appliance if it is
still hot.
Keeping the iron in its housing support at maxi-
mum temperature for too long time, may cause
its colour change, which will not affect the co-
rrect working order of the appliance.
For a correct operation, keep the soleplate in
proper conditions does not operate over me-
tal objects (ironing board metal parts, buttons,
zips etc.).
Only use water with the appliance.
Check that the safety cap screwed on tightly
before switching on the appliance.
Before each use, make sure that the product
valve/s are not blocked.
Check that the lid is closed properly before
starting the appliance.
Never leave the appliance connected and una-
ttended if is not in use. This saves energy and
prolongs the life of the appliance.
Do not use the appliance on any part of the
body of a person or animal.
INSTRUCTIONS FOR USE
BEFORE USE:
Make sure that all products' packaging has
been removed.
Some parts of the appliance have been light-
ly greased. Consequently, the first time the
appliance is used a light smoke may be de-
tected. After a short time, this smoke will di-
sappear.
Prepare the appliance according to the func-
tion you wish to use:
FILLING WITH WATER:
You must fill the water compartment before tur-
ning on the appliance.
NOTE: It is advisable to use distilled water, es-
pecially if the water in your area contains clay
or if it is "hard" (containing lime or magnesium).
Open water inlet lid.
Fill the compartment with cold water.
Fill the deposit taking care to observe the MAX
level .
Pour in water using the measuring cup and
funnel supplied.
Close the lid.
USE:
Extend the cable completely before plugging
it in.
(Original instructions)
EN
ES

Publicité

loading

Produits Connexes pour SOLAC Optima Center 2400

Ce manuel est également adapté pour:

Cpb6050