Groupes Electrogènes FP 1000 Inverter et FP 2000 Inverter
21. Examine and repair the breakdown
If the engine can not be started:
Does the fuel tank still have fuel? → If not, fill fuel into the fuel tank.
↓yes
Is the switch of the generator on the "open" position?→ If not, switch on the engine.
↓yes
Is there enough machine oil in the engine? → If not, add enough machine oil
↓yes
Is there any spark outside the spark plug? → If not, change the spark plug → If not, send the generator to
the authorized agent.
Warning
Make sure that there is no fuel spilling out of the spark plug. The overflowed fuel
may catch fire.
Examination:
1 Dismantle the spark plug, clean out the filth around it.
2 Dismantle the spark plug, enclose it into the cover of it.
3 Earth the side pole on the lid of the air cylinder.
4 When you pull the starting hold, the spark must spray from the clearance.
↓yes
If the engine still can not be started, send the generator to the authorized agent.
If the engine can not be started:
Does the outputting indicator light lighten? → If not, fill fuel into the fuel tank
↓no
↓no
Does the overloading indicator light lighten?
↓ No
Examine whether the electrical equipment or installations have any breakdown? → If not, send the
generator to the authorized agent
No electric power in the direct current socket:
Is the defender of the direct circuit open? → If not, open the defender of the direct circuit
↓
→→→→→
If yes, send the generator to the authorized agent.
63