PRO-POINT 8663833 Manuel D'utilisateur page 2

8663833
24 X 36 IN.
WELDING TABLE
SPECIFICATIONS
Material
Working Area
Weight Capacity
INTRODUCTION
The Welding Table is designed for use with a welding unit or
metalworking. The table is completely metal, helping establish
a ground when welding.
SAFETY
WARNING! Read and understand all instructions before using
this tool. The operator must follow basic precautions to reduce
the risk of personal injury and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or
inspection and maintenance instructions.
HAZARD DEFINITIONS
Please familiarize yourself with the hazard notices found in this
manual. A notice is an alert that there is a possibility of property
damage, injury or death if certain instructions are not followed.
DANGER! This notice indicates an immediate and specific
hazard that will result in severe personal injury or death if the
proper precautions are not taken.
2
24 X 36 IN. WELDING TABLE
For technical questions call 1-800-665-8685
Steel
24 x 36 in
440 lb
V1.1