Arcam DV78 Manuel page 23

Technical specifications
General
Power Requirements
Power consumption
Dimensions
Weight
Video outputs
Composite video
S-Video
Component video
SCART socket with RGB video
Audio outputs
Analogue audio outputs
Output level
Frequency response
THD+N
Signal-to-noise ratio
Digital audio output (IEC958)
Accessories supplied
E&EO
NOTE: All specification values are typical unless otherwise
stated.
All manuals and user guides at all-guides.com
100/115V or 230V AC, set by voltage selector switch on rear panel
< 35 VA
435mm x 80mm x 350mm
net: 5.2kg; packed: 8.0kg
1 x gold plated phono. 1V pk-pk in 75Ω
1 x 4-pin mini-DIN. Y 1V pk-pk in 75Ω, C 0.3V pk-pk in 75Ω
Interlaced or Progressive
3 gold plated phono sockets. Y 1V pk-pk in 75Ω, Pb 0.7V pk-pk in 75Ω,
Pr 0.7V pk-pk in 75Ω
All 0.7V in 75Ω, composite video 1V in 75Ω, and stereo audio
Auto switching of TV with aspect ratio control
Stereo outputs on gold plated phono sockets
2.2V rms at 0dB signal, 4V rms with HDCD discs
20Hz to 20kHz (+0.1db, –0.5dB)
<0.005% for 1kHz 0dB signal, measured 22Hz–22kHz, unweighted
105dB, measured 20Hz–20kHz, unweighted
PCM/Dolby digital/MPEG/DTS on gold plated phono (coax) and TOSLINK (optical)
Remote control
2 x AAA batteries
mains lead
Continual improvement policy
Arcam has a policy of continual improvement for its products.
This means that designs and specifications are subject to
change without notice.
DV78
23