Felder 400-310 Notice De Montage page 5

Installation guide: Vertical panel storage
Information relating to stability and loading
Attention - Material damage.
Damage and possible complete write-off of the storage system
Pay attention to the maximum load bearing capacity (see data plate)
A: 2000 kg ( = 27 pcs à 3000 x 2150 x 19 mm)
B: 100 kg ( max. 200 mm)
General description:
1. The stability necessary, can only be achieved if the assembly is done correctly.
2. It is not permitted to store or stack any components on the panel storage system.
3. All components must be stored within the storage frame (vertically) or be placed on the cantilever arms (horizontal).
4. Place the accompanying data plate in an easy to see position on the front frame. The maximum permissible load-
bearing capacity can be seen on the data plate and must not be exceeded.
5. In order to increase the stability, we recommend that the panel storage is secured in place in the corners using the
floor anchors that are delivered with the system. Fixing material must be selected, based on the respective floor condi-
tion.
Doc.ID: 400310-900_02 • English • 22.12.2022
Approx. 1400 mm
Detail
Detail A
Detail
Detail B
KR-FELDER-STR. 1
A- 6060 Hall i.T.
Tel: +43 (0)5223 - 58 50 0
Fax: +43 (0)5223 - 56 13 0
Type:
Vertikallager FVL
Art-Nr. :
400-310
Baujahr: 2022
max. 27 Stk.
3000 x 2150 x 19 mm
max. 2000 kg
A
www.felder-group.com
KR-Felder-Straße 1
6060 HALL in Tirol
AUSTRIA
400-310-208
User Specific
EN
max.
200 mm
B
max. 100 kg
Tel. +43 5223 5850-0
Fax +43 5223 5613-0