Batavia Croc Lock Compact Mode D'emploi page 9

• Use the Croc Lock only for the intended
purposes. Any other use is considered an
abuse. The manufacturer is not liable for
damage or injury caused by misuse.
• Only use accessories as recommended
in the user manual, the use of other
accessories can lead to injury.
• Store the workbench in a dry place that
is protected from dust, dirt and frost.
Keep the workbench out of the reach of
children.
3. Before the first use
Before mounting, please check all parts for
completeness. If parts are missing, do not
return back the work bench but contact our
support department.
Dispose of packaging materials or store it
out of reach of children. Plastic bags etc.
may become a deadly toy for children.
4. Contents of packing
1× Croc Lock Compact
1× Instruction manual
5. Intended use
The Croc Lock is a multifunctional work-
bench for many applications such as clamp-
ing of doors, frames, fencing, ceiling plates,
bicycles, car parts and all kinds of other
materials.
6. Assembly
Place the Croc Lock upside down on the
6.1
ground, unlock the rear leg lock lever (5)
and slide the rear leg (6) from the stor-
age position in the direction as shown.
Fully fold out the rear leg.
6.2
Slide the rear leg into position and lock
6.3
the rear leg locking lever (5).
Fold out the foot pedal (10) until it clicks
6.4
into position.
Fold out the front legs (9) until they click
6.5
into position.
Place the Croc Lock upright. Check if all
6.6
legs are firmly and in the correct posi-
tion and check if everything is locked.
Rotate the moving jaw locking tab (14)
6.7
to the horizontal position and the Croc
Lock is now ready for use.
7. Folding
Enter the assembly instructions in reverse
order from:
Ensure that the lock / release switch
7.1
(13) is in the "unlock position"
The moving jaw locking tab (14) is in
7.2
the "vertical" position to prevent the jaw
from sliding out
Place the Croc Lock upside down on the
7.3
ground. Unlock the front leg locks (12)
and fold in the front legs.
Unlock the foot pedal lock (11) and fold
7.4
the foot pedal in.
Unlock the rear leg lock lever (5) and
7.5
place the rear leg (6) in the storage
position and lock the rear leg lock lever
again.
The rear leg (6) can be used to lift the
7.6
Croc Lock in the folded position.
8. Operation
Clamping / locking
8.1
• Check that the moving jaw locking tab
(14) is set to the horizontal position and
push the moving jaw (4) back until your
workpiece fits between the jaws.
• Place the workpiece against the fixed jaw
(1) on the front.
• Slide the moving jaw (4) against the
workpiece. The moving jaw can be
moved by hand or with the foot pedal.
• Slide the lock / unlock button (13) down
to lock.
• Press the foot pedal (10) down to secure
the workpiece securely.
Loosening / unlocking
8.2
• Slide the lock / unlock button (13) up.
• Press the foot pedal (10) down until it
"clicks"
• Slide the moving jaw (4) back.
Note: Apply the same pressure on the foot
pedal when unlocking as when locking.
Warning: Support the workpiece so that it
does not fall when the workpiece is
unlocked.
Clamping on one side of the jaw
8.3
Large workpieces or workpieces with a
different shape can in some cases only be
English
7