THOMSON TT700 Mode D'emploi page 21

Anti-skating adjustment:
To adjust the anti-skating mechanism, you can turn the anti-skating knob anti-clockwise to
reach 0 grams of tracking force. You can turn the anti-skating knob clockwise to achieve up to
4 grams of tracking force. You can adjust the anti-skating knob if the cartridge slips.
Phono/line choice:
• The phono/line selector is located on the rear of the device.
• If you select "phono", the audio signal will bypass the internal preamplifier, and the
turntable needs to be connected to an external preamplifier to play your music.
• If you select "line", the audio signal will be processed by the internal preamplifier. The
turntable can be connected directly to active speakers to play music.
Playing a record:
• Remove the protector from the stylus.
• Make sure the arm is fully detached from the arm rest before playing and placed back
securely afterwards.
• Push the lift lever up to raise the arm, and carefully move it towards the record: the platter
will begin to turn.
• Push the lift lever down to lower the arm and gently rest it on the record. The record starts
playing.
• Push the lift lever up to raise the arm: the turntable continues to turn but the sound stops.
To continue playing, lower the lift lever.
• Changing speed - 33/45 rpm: depending on the record, choose 45 or 33 rpm playing.
• Use the 45 rpm adapter if necessary.
• Start / stop button: stops or resumes platter rotation.
• An Auto-return on/off button is located on the back of the device to activate/deactivate the
automatic return function of the arm. If the auto-return function is enabled, the arm will
automatically return back into place when the record is finished playing.
NB: If one of your vinyl records does not play to the end due to the auto-return function, you
can turn it off using the button on the back of the T700. Please note that the turntable will
continue to turn even if the record is finished, so you need to manually lift and replace the
tone arm.
- EN 21 -