Probuilder 69663 Manuel D'instructions page 16

Keep the appliance clean at all times, and
never insert objects in the air intake or the air
outlet, as this may cause electrical shock, fi re
or damage to the appliance.
Not for use in rooms less than 4 m
The appliance is not suitable for use outdoors
in damp weather, in bathrooms or in other
wet or damp environments.
Unplug the appliance prior to cleaning.
The symbol means that the appliance
must not be covered.
Never pull on the cord.
Caution: If the cord is damaged, it must be
replaced by a qualifi ed repairman to avoid
hazards.
Children must not play with the appliance,
and cleaning and maintenance must not
be performed by children unless they are
supervised.
0 0 Off Off
I I Fan setting Fan setting
1000 W
II II Fan setting Fan setting
2000 W
How to use
Control panel
1. First turn the thermostat to the max.
position and switch on the appliance
on the highest power setting (2000 W).
Once the required room temperature
has been reached, turn the thermostat
anticlockwise until it switches off (you
will hear a "click"). The thermostat will
then turn on and off to keep the room
temperature constant.
16
Keep children and pets away from the
appliance when it is turned on, as it will get
very hot.
The appliance must be kept out of the reach
. of children under 3 years of age unless they
2
are kept under constant supervision.
Children between the age of 3 and 8 may
only switch the appliance on and off if it
has been positioned or installed in the
intended normal operating position, and
they are monitored or instructed in safe use
of the appliance and they understand the
associated risks.
Children between the age of 3 and 8 must
not plug the appliance into a power socket
or control the appliance.
Caution: Some of the parts of the appliance
may get very hot and so represent a risk of
burning. Be aware of this when children or
infi rm people are nearby.
Always unplug the appliance when not in
use.
Control panel
2. After the use, follow the below steps
to operate the heater: turn off the
thermostat and switch (OFF position),
unplug and let the appliance cool
down to the air temperature. When the
appliance cools down completely, put it
in the packaging.
Thermostat Thermostat