Sylvania SCR1997 Mode D'emploi page 6

Connect the power adaptor. The unit will be in standby mode. You can now set the
clock time and adjust the LED brightness as followings:
SETTING THE TIME MANUALLY
1.) To set the hour, press and hold the MEMORY/SET button until the hour digits
flash.
2.) While the hour digits are flashing, repeatedly press the
the correct hour digits.
3.) Press the MEMORY/SET button to confirm the hour setting and the minute
digits will flash to prompt for input.
4.) While the minute digits are flashing, repeatedly press the
the correct minute digits are displayed.
5.) Press the MEMORY/SET button again to complete the clock setting.
6.) With the current time showing, press and hold the SNOOZE/SLEEP/DIMMER
button until "12H" apppears and flashes on the display. Press the
button to switch to 24 hour format.
NOTE:
i. When setting the PM time in 12H mode, make sure the PM indicator turns on.
dIMMER
1. When the unit is in standby mode, press the SNOOZE/SLEEP/DIMMER button
to adjust the LED display brightness to high or low level.
TUNING THE RAdIO ANd STORING THE PRESETS
1.) Press the POWER/FUNCTION button on the unit to turn on the unit.
2.) Press the POWER/FUNCTION button repeatedly to select the RADIO mode.
The FM frequency will be displayed.
3.) Press and hold either the
and stop when one is found.
NOTE:
Press or
4.) Press the MEMORY/SET button and
stations in order.
5.) Press the MEMORY/SET button again to confirm the setting.
6.) Repeat steps 3 - 5 to search for, and store the desired stations. 20 stations can
be stored in total.
7.) Press the PRESET
wish to listen to. The LED display will show the frequency of the preset station
CLOCk SETTING
RAdIO OPERATIONS
or
button repeatedly to fine tune the received
button and
button to automatically search for a station
or button to store the received
or button to select the stored station you
6
or button to select
or buttons until
or
stations.