Publicité
Les langues disponibles
Les langues disponibles
Using the Shield Rotary Tool Attachment:
Always turn tool power off before adjusting position, changing accessory, and removing attachment. Rotary Tools cut, sand, grind, and polish in
many directions. To accommodate the Rotary Tool's Maneuverability, the Shield can be quickly positioned and repositioned with a turn to the right
or left .To extend the life of the Shield periodically clean with a soft bristle brush or compressed air.
F
F
g i
g i
1 .
1 .
0
A
A
Always pull out the mains power plug before starting any cleaning work.
Cleaning
●
Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible.
Wipe the equipment with a clean cloth or blow it with compressed air at low pressure.
●
We recommend that you clean the device immediately each time you have finished using it.
●
Clean the equipment regularly with a moist cloth and some soft soap. Do not use cleaning agents or solvents; these could attack the plastic parts
of the equipment. Ensure that no water can seep into the device.
Fig.11
Cleaning, maintenance
- 18 -
F
F
g i
g i
1 .
2
B
C
Publicité
