OXFORD BABY 22263 Instructions De Montage page 4

THIS STEP REQUIRES :
(H) Screw 1-3/8"(35 mm) (3 pcs)
STEP 3:
- Place the changing topper on top of the dresser.
- The holes in back side should be below Dresser top surface. (see diagram)
FIG.3.
100-22263-V-01
ASSEMBLY OF CHANGING TOPPER
STEP 4:
Insert the screws into the back of the changing
topper and dresser, tighten with Screw driver.
Check to see that the changing topper is secure.
Complete assembly as shown in FIG.3.
4 of 4
SCREW DRIVER (Not Included)