Medline MDS3003 Guide D'utilisation page 14

3. CONNECTING THE CUFF TO THE MONITOR
The cuff is attached to the monitor when it is
packaged, Should the cuff become unattached,
align the two plugs and four brackets of the
cuff with the plug sockets and bracket
sockets of the monitor and press the cuff
to the monitor until the plugs and brackets
are securely attached.
4. APPLYING THE CUFF
a. Place the cuff around a bare arm 1-2 cm above the wrist joint on the
palm side of the wrist.
b. While seated, place the arm with the cuffed wrist in front of your body on
a desk or table with the palm up. If the cuff is correctly placed, you can
read the LCD display.
c. The cuff must be neither too tight nor too loose.
-14-