Publicité
Les langues disponibles
Les langues disponibles
19. Toggling the Sound Effects
By default, the camera's sound effects (including the shutter sound, power-on and power-off sounds, and all button
sounds) are on.
Turn them off as described below:
1.
With the camera on (see chapter 7), press the settings button to enter the settings menu.
2.
Select "Sound Effect" by pressing the up button or the down button, then press the right button or the
shutter button to enter the sound effect submenu.
* To return to the settings menu without making any changes, press the left button or keep "On" selected and
press the shutter button.
3.
Press the up button or the down button to select "Off", then press the shutter button to confirm and the
camera automatically returns to the settings menu.
To exit the settings menu, press the settings button.
To turn the sound effects back on, follow steps 1 to 3 above, except select "On" in step 3.
20. Transferring Files from the Camera
Copy files (photos, videos, or both) to a computer as described below.
* For all steps below, make sure the camera is dry and use dry hands.
1.
1.
Use the included USB cable to connect the camera to a computer (see chapter 5).
* The camera can be connected whether the camera is on or off. If the camera is off, it automatically turns on
once it is connected.
* Connect the camera directly to the computer, not via a peripheral, such as a USB hub.
2.
2.
The internal memory and, if a memory card is inserted into the camera (see chapter 3) the memory
card is listed on the computer as removable drives named "Zila Data" and "Zila Card" respectively. Files
can be found in folders on one drive or both drives, depending on where they were saved . Select the
desired files, then copy the selected files to the desired location on the computer.
* Do not disconnect the cable or remove the memory card, if any, until copying is complete.
* When copying is complete, carefully disconnect the cable from the camera and the camera automatically turns
off. Then close the silicone cover (step 3 on chapter 3) to prevent dust or water from entering and damaging the
camera.
EN-20200831
Publicité
