Basic Operation - Fiilex M1 Mode D'emploi Rapide

Basic Operation

• Turning The Light On
Insert the PowerCon Cable into the PowerCon Connection Port (19). Rotate clockwise
to lock in place. Plug in the light. Press the On / Off Button (10) to turn the light on.
• Positioning The M1
Loosen the Yoke Knob (9) to adjust the M1 to the desired position. Tighten the Yoke
Knob (9) to secure.
• Mounting The M1
The M1 can be mounted to baby and/or junior stands with the combo pin. Secure the
light by tightening the
• DMX Interface
The M1 is equipped with two DMX interfaces (18, 20). XLR ports are used to send the
DMX signal to the lamps. Both interfaces include in/out ports for the purpose of
daisy-chaining the DMX line through to the next light.
• USB Interface
The M1 is equipped with a mini USB Port (13) for updating the M1's firmware. Please
register your product at www.fiilex.com to be informed when firmware updates are
available.
• WiFi Controllability
The M1 is WiFi ready for remote control. Use smart device app to connect up to four
M1 lights and operate them remotely. App can set intensity, CCT, hue, and customized
effects.
Locking Knob (7).
3