Specifications
Size (Without Barndoor)
Weight (Includes Yoke)
Weight (Power Adapter)
LED
Thermal Design
CCT Range
CRI
Hue Control
Power Consumption
Input Voltage
Input Port
Operating Temperature
Beam Angle
Mounting
Tilt Angle
DMX Control
Mini USB Interface
Housing Colors
IP Rating
LED Lifetime
Certifications
Error Codes
01
Over Voltage Protection
02
Under Voltage Protection
03
Display and Control Board Conjunction Error
05
Fan Error
14 / 24 / 34 / 44
Array 1 / 2 / 3 / 4 Thermistor Conjuction Error
16 / 26 / 36 / 46
PCBA 1 / 2 / 3 / 4 Thermistor Conjuction Error
OVERHEAT
Array or PCBA Overheat
For Your Safety
• CAUTION! High Beam Intensity! - Do NOT look into the light source of the fixture.
• Do NOT point the light at combustible or flammable materials.
• Do NOT attempt to disassemble the body of M1. Doing so will void the warranty.
• Do NOT install M1 in a damp or wet area.
• Do NOT cover/block the side and back air vents.
• Use only the included power supply. Failure to do so may cause damage to the light.
• Use only a soft, dry towel to gently clean the exterior of the light.
• Do NOT lift or suspend the light by the power cable.
• Do NOT use the M1 or accessories if they display any physical damage.
• Before first use, make sure to remove all protective membranes.
L 6.7" x W 11.6" x H 16.5" / 171mm X 294mm x 418mm (With Yoke)
9.5 lbs / 4.3kg
5.1 lbs / 2.3kg
4x Dense Matrix LED
Advanced Vapor Cooling System
2800-6500K Continuous Tuning
≥ 93 (3000K-5600K)
±.25 Magenta / Green
320W Max AC / 300W Max DC / Comparable in Output to 1500W Tungsten
AC Power: 100-240V AC, 50~60Hz, Max 340W / DC Power: 45-54V DC, Max 300W
Detachable PowerCon Cable
32-104ºF / 0-40º C (Over Temperature Protection)
110° / 30° with M1 Fresnel Lens (Not Included)
Baby Stud 5/8" Female (16mm) and Junior Stud 1-1/8" Male (28mm)
+/- 90°
2 XLR Ports (512 Addresses)
For Firmware Upgrades
Black
IP24
42,000 Hours
CE, UL, FCC
7