Worldcast Systems AUDEMAT FM MC5 Mise En Route page 6

English version
 Click on Internet Protocol 4, then on Properties.
 Add the IP address and the sub-net mask (for example 192.168.17.56 /
Netmask 255.255.0.0).
With Windows 8.1 or 10, click the Start button, and:
 Control panel/Network and Internet / Network and Sharing Center.
 Click the Ethernet menu then on Change Adapter Settings
 Click on your local area connection, and on Properties
 Click on Internet Protocol version 4 (TCP/IPv4) and on Properties.
 Add the IP address and the sub-network mask
(for example 192.168.17.56/ Netmask 255.255.0.0).
5. Installing the applications
Navigate to the Download page to download the Audemat
FM Metering application, the main application for the unit.
Click "Application installer" and follow on-screen
instructions to install it.
With the AUDEMAT FM MC5, you may also download the
reader for mobile campaigns.
1. Launch the application from the desktop shortcut or go
to Programs/WorldCast Systems/Audemat FM MC5 _
ModulationAnalyzer version/Audemat FM Metering.
2. Enter connection parameters.
Click on the "Discover list": the list of units connected to the
network is displayed. The green indicators show units whose
embedded version is compatible with the remote application
version.
Double-click on the desired unit: The IP address and port are
displayed up top.
Enter the login and password.
3. Once the connection is established, start setting your unit:
6
All manuals and user guides at all-guides.com
The application installer can be downloaded on the
Modulation Analyzer embedded website. Open your web
browser (Internet Explorer, Mozilla...) and enter the IP
address you just set via the front panel.
The default login and password are:
sensitive).
Admin
We recommend you read the manual for
more details on:

Setting system parameters

Setting measurement configurations

Running measurements

Launching drive tests

Scheduling readings

Analyzing campaigns
/ admin (case