Display
The display is useful when programming the machine and provides a great deal of information.
The duration of the available programmes and the remaining time of a running cycle appear in section A; if the DELAY START
option has been set, the countdown to the start of the selected programme will appear. Pressing the relative button, the
machine automatically displays the maximum temperature and spin speed values set for the selected cycle, or the most
recently-used settings if they are compatible with the selected cycle.
The "programme phases" relative to the selected programme and the "programme phase" of the running programme appear
in section B:
Wash
/
Rinse
/
The icons corresponding to "temperature"
If the
symbol lights up, the display will visualise the set "temperature" value.
When a "delayed start" has been set, the
If the
symbol lights up, the display will visualise the set "spin" value.
Door locked symbol
The lit symbol indicates that the door is locked. To prevent any damage, wait until the symbol turns off before opening the
door (wait approximately 3 minutes). To open the door while a cycle is in progress, press the START/PAUSE button; if the
symbol is switched off the door may be opened.
How to open and to close the drum
Fig. 1
Fig. 3
All manuals and user guides at all-guides.com
Spin
/
Drain
, "Programmed start"
symbol lights up.
Fig. 2
Fig. 4
B
A
C
and "spin"
appear in section C from top to bottom:
A) Opening (Fig. 1).
Lift the external lid and open it completely.
B) Opening the drum (Soft opening):
With one finger, push the button indicated in fig. 2 and the drum
will open delicately.
C) Loading the washing machine (Fig. 3).
D) Shutting (Fig. 4).
- close the drum fully by first shutting the front door
followed by the rear one;
- then ensure the hooks on the front door are perfectly
housed within the seat of the rear door;
- after the hooks have clicked into position, press both
doors lightly downwards to make sure they do not
come loose;
- finally shut the external lid.
GB
5