Cadac DOMETIC 2 COOK 3 Mode D'emploi page 6

EN
General
• Once the appliance is lit, the flame intensity may be adjusted by turning the control knob anti-clockwise to reduce the flame or clockwise to
increase the flame.
• When cooking food with a high fat content, flaring may occur if the selected heat setting is too high. Should this happen, turn the heat down
until the flaring ceases.
• Do not move the appliance when in use. It is unsafe practice to move the appliance whilst lit and may cause flaring.
• After use, first close the control valve on the gas cylinder (where applicable). When the flame has extinguished, close the control valve on
the appliance.
4. Component List
Product code: 203P1-20
Product code: 203P1-10
4 4
Flat Grill Plate
(used for frying)
Ribbed Grill Plate
(used for Grilling)
Grill Handle
Lid
Coffee Pot Stand
(used for Coffee making)
Pot Stand
(used for Boiling)
Wind Shield
(wind protection)
Burner
Control Knob
Piezo Button
Lid
Pot Stand
(used for Boiling)
Wind Shield
(wind protection)
Burner
Control Knob
Piezo Button