Publicité
Les langues disponibles
Les langues disponibles
Instruction FH-CWD Thermostat
room temperature and maximum floor temperature
limit. Factory setting is 01.
6. Maximum floor temperature
protection
The function allows you to set a maximum allow-
able floor temperature if for instance you want
to protect real wood floors from damage due to
excess heat. For specific maximum floor tempera-
tures please refer to recommendations from floor
suppliers.
Displaying the Floor Temperature
The function allows you to check the internal tem-
perature of the floor. Works only with floor sensor.
Turn ON the thermostat by pressing
• Press M Fig. 1
display.
• The actual floor temperature is shown in the display.
Setting maximum floor temperature
Turn OFF the thermostat by pressing
• Press M Fig. 1
shows
• Release M Fig.1
Produced by Danfoss Floor Heating Hydronics 05.2011
shortly and
for 5 seconds until the display
.
, and the display shows
.
Fig. 1
will flash in the
Fig. 1
VI.CU.B2.2D
.
9
Publicité
